ColorBAT Devil Dip is a powerful nozzle anti-clogging solution that can be used in all ink jet printers.

It helps to clear clogged nozzles, and when mixed with ink, it will help to avoid nozzle-clog.

To clear clogged nozzles, inject it into an empty cartridge and then run a few Cleaning Cycles using that cartridge. Each Cleaning Cycle will suck some of the Devil Dip down into the nozzle assembly where it will go to work immediately to dissolve dried up ink and clear the nozzle of any obstructions.

Devil Dip can also be used to clean up and clear the Cleaning Cycle suction pump. Frequently these pumps get loaded up with partly dried ink and then they usually do not perform a very good Cleaning Cycle because they no longer can suck ink through the nozzle assembly. 

Devil Dip contains a secret mixture of powerful solvents (including ammonia) that will dissolve all types of dried up ink, including all types of pigmented ink as well as dye-based ink. It can safely be used in all brands of ink jet printers.

Devil Dip is a water-clear solution. When used in an old, ink cartridge, it will mix with the traces of ink that remain in the cartridge and take on the color of that ink. Then, when you make a Nozzle Test Print, the traces of color will allow you to see if the nozzles are truly clear and printing correctly.